Key:    |     * Some Restrictions     |     = Yes

Features Digital Direct
Mount Monitor
Digital Direct
Mount Monitor Kit
Digital Remote
Mount Monitor
Click Photo to
Shop Product →
Available Voltages 110/220v or 12v DC 110/220v 110/220v or 12v DC
Installation Mounted directly to the water purifier using a standard probe that is installed into the sight port fitting. The collar on the bottom of the Monitor is secured over the sensor probe. Two Digital Direct Mount monitors, one for each chamber. Each reads the UV levels independently, but they work together to shut down flow if UV falls below its trip point. Intended for use in locations away from the water purifier. The remote probe installs into the sight port fitting of the water purifier. The remote probe cable connects the probe to the monitor.
GUARDIAN UV Models
30‑8251
110/220v
30‑8250
110/220v
30‑8255
12v
30-8249
110/220v
1
30‑8253
110/220v
30‑8252
110/220v
30‑8257
12v
All MIGHTY★PURE® Models
SANITRON® S17A
SANITRON® S23A
SANITRON® S37C
SANITRON® S50C
SANITRON® S2400C & Up
SANITRON® S5,000C
What's Included?
Optional Accessories

Key:    |     * Some Restrictions     |     = Yes

1 Dual Digital GUARDIAN™ Ultraviolet Monitor Kit is available for the SANITRON® S5,000C.

*An RJ45 modular cable is required to interconnect between the GUARDIAN Ultraviolet Monitor and other remote monitoring devices. An RJ45 modular jack adapter might be needed to interconnect the RJ45 cable and a remote monitoring device. The RJ45 modular jack adapter and the RJ45 modular cable are not included with the purchase of the GUARDIAN Ultraviolet Monitor and if required, may be purchased separately.